Please login to receive your customized account pricing.

44 found, showing page 2 of 3
DREMEL 3/4" BRISTLE BRUSH
DREMEL 3/4" BRISTLE BRUSH
$2.99

DREMEL 3/4" BRISTLE BRUSH

SKU: 6199418

Brush has long wearing nylon bristles and can be used for light deburring, cleaning and polishing of silverware, jewelry and other precious metals. Can be used with polishing compound. Do not run in excess of 15,000 RPM.

DREMEL 1/2"  SANDING BAND PK6
DREMEL 1/2" SANDING BAND PK6
$2.99

DREMEL 1/2" SANDING BAND PK6

SKU: 0199505

Replaceable sanding bands covered with aluminum oxide abrasive used for rough shaping or smoothing of wood and fiberglass. Removes rust from metal surfaces and shapes rubber surfaces. Requires a mandrel with a 1/8" shank. Do not run in excess of 30,000 RPM.

DREMEL 15/16" CUTOFF WHEEL  PK20
DREMEL 15/16" CUTOFF WHEEL PK20
$6.49

DREMEL 15/16" CUTOFF WHEEL PK20

SKU: 6782163

For slicing and cutting metal, wood and plastic. Easily cuts or slots bolts, screws, sheet metal, thin wood and plastic. Trims castings and molded ceramics. Cuts only along its edge. Do not attempt to sand or cut curved holes. Do not run in excess of 30,0

DREMEL 1-1/4" CUTOFF WHEEL PK5
DREMEL 1-1/4" CUTOFF WHEEL PK5
$9.49

DREMEL 1-1/4" CUTOFF WHEEL PK5

SKU: 0225268

Fiberglass reinforced, use for slicing and cutting metal, wood and plastic. Do not attempt to sand or cut curved holes. Do not run in excess of 30,000 RPM. Use with No.402 mandrel.

DREMEL 1-1/4" CUTOFF WHEEL
DREMEL 1-1/4" CUTOFF WHEEL
$5.49

DREMEL 1-1/4" CUTOFF WHEEL

SKU: 6081574

Easily cuts off slots bolts, screws, sheet metal, thin wood and plastic, trim castings and molded ceramics. Cuts only along its edge. Do not attempt to sand or cut curved holes. Do not run in excess of 30,000 RPM. Use with No. 402 mandrel.

DISCONTINUED WITH ORGILL...DISCONTINUED WITH ASHBY, POOR HISTORY..KA

DISCONTINUED WITH ORGILL...DISCONTINUED WITH ASHBY, POOR HISTORY..KA

SKU: 6421077

For use all dremel tools. Powerful shaping tool that quickly and efficiently removes material. Easily creates compound curves and works on a variety of materials including woods, fiberglass, laminates, plastic and leather.o.Cuts and finishes in one operation. Use the edge of the wheel for cutting and slotting. Use the "face" of the wheel for shaping. Cuts 33 percent deeper than former cutting/shaping wheels up to 1/2". DO NOT USE ON METAL

DREMEL DRYWALL CUTTING BIT
DREMEL DRYWALL CUTTING BIT
$3.29

DREMEL DRYWALL CUTTING BIT

SKU: 6339923

Makes fast clean cuts in drywall for electrical boxes, air vents and other wall features. Do not run in excess of 30,000 RPM.

DREMEL MULTIPURPOSE CUTTING BIT
DREMEL MULTIPURPOSE CUTTING BIT
$4.99

DREMEL MULTIPURPOSE CUTTING BIT

SKU: 6339949

Cuts wood, plastic, fiberglass, drywall, laminate and aluminum and vinyl siding. Do not run in excess of 30,000 RPM.

DREMEL TILE CUTTING BIT
DREMEL TILE CUTTING BIT
$13.49

DREMEL TILE CUTTING BIT

SKU: 0223081

High-speed cutter shapes ceramic wall tile around bathroom or kitchen fixtures or plumbing pipes or create decorative wall tile by cutting a design.

DREMEL 3/4" WIRE BRUSH PK2
DREMEL 3/4" WIRE BRUSH PK2
$5.89

DREMEL 3/4" WIRE BRUSH PK2

SKU: 7138118

Brush is used for cleaning and removing rust and corrosion from items made of brass, copper or other soft ferrous metals. Wire brush can be used to create an artistic effect on coarse grained wood or cleaning flat surfaces and getting into hard to reach places. Do not run in excess of 15,000 RPM.

DREMEL 1" POLISH WHEEL FELT
DREMEL 1" POLISH WHEEL FELT
$3.29

DREMEL 1" POLISH WHEEL FELT

SKU: 6199715

Disc used to polish most metal and plastic surfaces. Using No.421 polishing compound with wheels produces a high luster. Use with No.401 mandrel. Do not run in excess of 30,000 RPM.

DREMEL 1/4" COARSE DRUM SANDER
DREMEL 1/4" COARSE DRUM SANDER
$4.49

DREMEL 1/4" COARSE DRUM SANDER

SKU: 6782171

Sanding Band covered with 60 grit aluminum oxide abrasive. Use for rough shaping, smoothing wood or fiberglass, removing rust from metal surfaces and shaping rubber surfaces. Bands are easily replaceable on drums. Do not use in excess of 30,000 RPM.

DREMEL 1/4" CRS SANDING BAND PK6
DREMEL 1/4" CRS SANDING BAND PK6
$3.49

DREMEL 1/4" CRS SANDING BAND PK6

SKU: 28991

DREMEL 1/4" CRS SANDING BAND PK6

DREMEL 1/2"FINE SANDING BAND PK6
DREMEL 1/2"FINE SANDING BAND PK6
$2.99

DREMEL 1/2"FINE SANDING BAND PK6

SKU: 0199729

Replaceable sanding bands covered with aluminum oxide abrasive used for rough shaping or smoothing of wood and fiberglass. Removes rust from metal surfaces and shapes rubber surfaces. Requires a mandrel with a 1/8" shank. Do not run in excess of 30,000 RPM.

DREMEL 1/4"FINE SANDING BAND PK6
DREMEL 1/4"FINE SANDING BAND PK6
$3.49

DREMEL 1/4"FINE SANDING BAND PK6

SKU: 28992

DREMEL 1/4"FINE SANDING BAND PK6

44 found, showing page 2 of 3